Masuma MP586 — Stabilizer bushing
Where to buy
Enter your VIN or make, model and year: the AI consultant will check compatibility and suggest a replacement if it does not fit.
What this part is
The Masuma MP586 stabilizer bushing is a rear anti-roll bar bushing with an inner diameter of 14 mm. It holds the stabilizer bar in place and absorbs its play, which causes knocking and body roll in corners. The part is installed on the rear axle.
The bushing is used on Toyota Corona Saloon 2.0 4WD (ST195), Harrier 2.2 and 3.0 4WD (SXU15, MCU15), as well as on Lexus RX 300 AWD and RX 350 AWD (GSU35). When selecting, use the MP586 number, the 14 mm inner diameter and the installation side — rear axle; verify the data against the vehicle's specification and model year.
Cars that fit MP586
HARRIER (_U1_) 2.2 4WD (SXU15) (05.1997 - 01.2003)
HARRIER (_U1_) 3.0 4WD (MCU15) (03.1998 - 01.2003)
HIGHLANDER / KLUGER (_U4_) 3.5 4WD (GSU45_, GSU45R) (06.2007 - 02.2014)
VISTA / CAMRY Saloon (_V3_, _V4_) 2.0 (SV41_, SV42_, SV41, SV42) (06.1994 - 06.1998)
RX (MCU15) 300 (MCU10_, MCU10R) (01.1998 - 02.2003)
RX (_U3_) 350 AWD (GSU35_, GSU35R) (02.2006 - 12.2008)
Check the part by VIN before buying: fitment depends on the engine and model year.
Cross-references and replacements for MP586
| Brand | Number | Name | Price from |
|---|---|---|---|
| Jikiu | BL21144 | BL21144 JIKIU Втулка стабилизатора LEXUS RX300/330/350 03- зад.подв.14мм | 580 ₽ |
| Toyota | 4881848080 | Втулка стабилизатора 48818-48080 | 38 ₽ |
| Toyota | 4881548040 | Втулка стабилизатора Lexus RX 03-09 / Toyota Harrier 03-13 | 238 ₽ |
| Febest | TSB804 | Втулка заднего стабилизатора D14 Toyota Harrier/Lexus RX300 FEBEST TSB-804 | 184 ₽ |
| Toyota | 4881848030 | Втулка стабилизатора задняя Toyota 4881848030 | 148 ₽ |
| Asva | 0107001 | Втулка стабилизатора перед. TOYOTA/LEXUS TOYOTA KLUGER L/V ACU25/MCU25 4WD 2000-2007 | 236 ₽ |
| Точка Опоры | 101191 | Втулка стабилизатора LEXUS RX300/330/350 03- зад.подв.14мм (полиуретан) | 373 ₽ |
| Unio | RMP10207 | Втулка стабилизатора | 138 ₽ |
| Asva | 0107804 | ¬тулка заднего стабилизатора d14 TOYOTA KLUGER L/V ACU25/MCU25 4WD 2000-2007 | 180 ₽ |
| Tatsumi | TEF1083 | Втулка (сайлентблок) заднего стабилизатора | 75 ₽ |
| Gsp | 513125 | Втулка стабилизатора | 94 ₽ |
| Avantech | ABH4104 | Втулка стабилизатора заднего Avantech | 117 ₽ |
| Marshall | M8080372 | Втулка стабилизатора Toyota Highlander 07-/ Kluger | 211 ₽ |
| Stellox | 7900886SX | Втулка стабилизатора заднего | 103 ₽ |
| Sat | ST4881832090 | Втулка стабилизатора Lexus RX 06-09 / Toyota Camry 94-06 (Зад/ 14.00) | 121 ₽ |
| Patron | PSE2656 | Втулка (сайлентблок) заднего стабилизатора | 132 ₽ |
| Точка Опоры | 101191B | Втулка зад.стабил.TOYOTA CAMRY (00.06-03.02),D 14 мм | 346 ₽ |
| Narichin | NRT2019 | Втулка заднего стабилизатора | 113 ₽ |
| Toyota | 4881832090 | Втулка тпу | 269 ₽ |
| Toyota | 488180E010 | ВТУЛКА СТАБИЛИЗАТОРА | 379 ₽ |
| Zekkert | GM1684 | Втулка стабилизатора,амортизатора | 123 ₽ |
| ZentParts | Z02609 | Опора, стабилизатор | 144 ₽ |
| Sufix | SK30023 | Втулка стабилизатора | зад прав/лев | | 118 ₽ |
| R8 | R84881848030 | Втулка заднего | 149 ₽ |
| TrustAuto | SLB3000201 | Втулка резиновая (TA) SLB300-0201 | 124 ₽ |
| R8 | R84881832090 | втулка заднего стабилизатора - d14 | 92 ₽ |
| Polyblack | T01293 | Втулка стабилизатора усиленная полиуретановая T-01-293 48818-32090 PolyBlack | 238 ₽ |
| Asva | 107804 | ВТУЛКА ЗАДНЕГО СТАБИЛИЗАТОРА D14 | 269 ₽ |
| Shinhwa | T249 | Втулка стабилизатора не оригинал Shinhwa | 305 ₽ |
| R8 | 4881832090 | Резинки | 227 ₽ |
Prices are market minimums according to Kulisa Data as of 22.10.2026, excluding delivery.
How to choose and what to check
Among the alternatives are Jikiu BL21144, Febest TSB804, Asva 0107001 and the OEM numbers Toyota 4881848080, 4881548040, 4881848030 — check them against the fitment for your model. Verify compatibility by VIN or by make, model, body and model year. The bushings should be replaced when there is knocking and squeaking in the rear suspension, noticeable play of the bar, or cracks and tears in the rubber during inspection.
Frequently asked questions
What can replace the Masuma MP586 bushing?
The alternatives Jikiu BL21144, Febest TSB804, Asva 0107001 will fit, as well as parts with the numbers Toyota 4881848080, 4881548040 and 4881848030. Before buying, check the 14 mm inner diameter and the installation side.
How do I check whether the bushing fits my car?
Compare the make, model, body, drive type and model year with the fitment, or better yet check by VIN. Be sure to confirm that the part is installed on the rear axle and has a diameter of 14 mm.
When should stabilizer bushings be replaced?
When there is knocking and squeaking in the rear suspension, play of the stabilizer bar, or cracks and tears in the rubber during inspection. Usually the bushings are replaced as a pair on the same axle.
Find it in the bot
Data for stores