Hyundai-KIA 39180-25300 — Crankshaft Position Sensor
Where to buy
Enter your VIN or make, model and year: the AI consultant will check compatibility and suggest a replacement if it does not fit.
What this part is
The Hyundai-KIA 39180-25300 crankshaft position sensor tells the control unit the position of the crankshaft and how fast it is rotating. The ECU uses this data to calculate ignition timing and fuel delivery. The genuine part numbered 39180-25300 belongs to the engine electronic control group 2400 CC - THETA 2.
The sensor is used on the Hyundai ix35 and Tucson built in 2011-2013 and 2013-2015, as well as on the Hyundai Santa Fe 2009-2012 with the Theta 2 2.4 engine. When selecting, verify the number 39180-25300 and the engine modification, since connectors and mountings may differ between different Theta 2 versions.
Cars that fit 39180-25300
IX35/TUCSON 14 (2013-2015) (2013-2015)
SANTA FE 10 (2009-2012) (2009-2012)
SANTA FE 12 (2012-2015) (2012-2015)
SANTA FE 15 (2015-2018) (2015.05-2018.02)
SANTA FE 15 (2015-2018) (2015.05-2016.06)
SANTA FE 15 (2015-2018) (2015.05-2016.12)
SANTA FE 18 (2018-2020) (2018.03-2019.02)
and 7
Check the part by VIN before buying: fitment depends on the engine and model year.
Cross-references and replacements for 39180-25300
| Brand | Number | Name | Price from |
|---|---|---|---|
| FISPA | 83589 | Sensor | — |
| WILMINK GROUP | wg1408479 | Sensor | — |
| HERTH+BUSS JAKOPARTS | j5660301 | Sensor | — |
| ERA | 550771 | Sensor | — |
| HOFFER | 7517686 | Sensor | — |
| SIDAT | 83589 | Sensor | — |
| MAGNETI MARELLI | 600000178200 | JAKOPARTS | — |
| BLUE PRINT | adg07258 | Sensor | — |
| WILMINK GROUP | wg1493990 | Sensor | — |
| HITACHI | 138185 | Hueco | — |
| BOGAP | Y6115127 | Sensor, crankshaft pulse | — |
| METZGER | 0902295 | genuine | — |
| Febi | 107758 | Датчик положения коленчатого вала | — |
| KAVO PARTS | ecr3031 | Sensor | — |
| MEAT & DORIA | 87686 | Sensor | — |
| TRISCAN | 885543110 | Sensor | — |
| VEMO | v52720154 | Q+, original equipment manufacturer quality | — |
| ASHUKI | y39018 | Sensor | — |
Prices are market minimums according to Kulisa Data as of 22.10.2026, excluding delivery.
How to choose and what to check
18 alternatives are available for replacement, including FISPA 83589, ERA 550771, SIDAT 83589, HOFFER 7517686, HERTH+BUSS JAKOPARTS J5660301 and WILMINK GROUP WG1408479 — compare the number and connector type with the original. It is best to check compatibility by VIN or by the exact model, year and engine. The sensor is replaced when starting is difficult, during jerking, loss of power or a crankshaft synchronization error.
Frequently asked questions
Can an alternative be installed instead of the original 39180-25300?
Yes, the catalog lists 18 alternatives, including FISPA 83589 and ERA 550771. Before buying, compare the number, connector and mounting hole locations with the original part.
How can I check that the sensor will fit my car?
Compare the model, year of manufacture and engine with the applications: ix35/Tucson 2011-2015 and Santa Fe 2009-2012 with the Theta 2 2.4 engine. The most reliable way is to check by VIN.
When should the crankshaft position sensor be replaced?
With synchronization errors, starting problems, jerking and unstable engine operation. It is also worth inspecting the connector and wiring before replacing the sensor itself.
Find it in the bot
Data for stores